Mentor Graphics PADS is a powerful software for designing and manufacturing PCBs. PCB engineers and designers are always looking for reliable, high-quality tools. Mentor Graphics PADS is software that simplifies the design of printed circuits due to its layering capabilities and powerful tools in the field of circuit schematics. In this program, information on all components is collected in one central place, which will prevent duplication of the required parts, this will reduce design time and prevent rework.
If you need to design boards that have a high percentage of high-speed signals, you will fully understand the importance of using constraint-based design. Create, review and evaluate yourself. It is possible to design different reports in this program, it is also possible to compare different archived designs, the advanced layout of this product makes it possible to design different printed circuit boards with printability. This software is especially ideal for designing boards that are not very complex.
Features and specifications of Mentor Graphics PADS software:
- Circuit schematic design
- Online simulation of designed circuits
- Selection of different components and evaluation within the department
- Powerful finder and filtering with information management of various components
- Ability to create IPC compliant templates
- Manage constraints seamlessly
- Very fast application of restrictions and accurate routing
- Signal health test using HyperLynx
- Simulation of analog and thermal circuits
- The central library consists of various components
32-bit Operating systems: Windows 10, Windows 8.1 & Windows 7 SP1
64-bit Operating systems: Windows 10, Windows 8.1 & Windows 7 SP1
Memory requirements: 8 GB RAM (min)
Disk space requirements: Download
~ 3.3 GB, Installation 7GB
Operating System: Windows 10, Windows 8. x, Windows 7, Windows XP Professional (SP3), Windows Vista (SP1)
1 GB memory minimum
Mentor Graphics PADS images
Listed in the Readme file in the Crack folder.
It is noteworthy that MentorGraphics software generally does not run on virtual systems!
PADS Pro VX.2.10 version:
Use the MentorKeyGen Tool V1.3.1e.exe crack and the Readme file next to it.
PADS VX.2.7 / 2.8 Pro versions:
From the Crack folder, run the MakeLic.bat file to generate the licensefile.dat file.
Create a folder called MentorGraphics in the root of the C drive and copy the generated licensefile.dat file to it (C: \ MentorGraphics).
Environment. reg file From the Setup folder, run
the setup.exe file and click install Products.
During installation, when the message Licensing not found is displayed, select yes, select
Import License, click next and then browse. . In the window that opens, in the lower-left corner, change the value of File of Types to License Files (* .dat), go to C: \ MentorGraphics, and select the licensefile.dat file,
click next and then do
* If the installation page does not display properly, close the page and run setup.exe again
Go to the installation steps
In the Post Installation Scripts step, click I would like to continue through the licensing setup and click next
Select the default values of Mobile Compute and MGLS Licensing and click next to
browse, from the bottom right corner, Select the License Files value (* .dat) and select the file C: \ MentorGraphics \ licensefile.dat
Click next and go-ahead
The software is now ready to use
THIS is for PADSVX.2.2 but works for any VX version of PADS Standard and Standard Plus
1. Run the setup in the default folder (C: \ MentorGraphics)
2. Skip the license install
3. Modify the installation as follows:
a) Change the Target Path to C: \ MentorGraphics \ PADSVX folder you created earlier
b) Select ALL the packages available for installation from Product Selection, then unselect the following:
– Check for updates
– Design Archive
– Server tools
4. Now run the installation.
5. During the installation you will be prompted to unregister earlier versions of PADS (9.5 and 2005). Click YES to that. You can use the Release Switcher later to go back to either one.
6. After the install has finished, copy the MentorKG.exe and run.bat found in the Crack folder to the C: \ MentorGraphics \ PADSVX folder
From there run “run.bat” and wait until it generates a license file (should open a Notepad license.txt
Save this file as PADSVX_LICENSE.TXT in the C: \ MentorGraphics \ PADSVX folder
7. Now run the PADSVX setup again (PADSVX.2.2_mib.exe) and this time DON’T SKIP license installation. Click NEXT to go to the License Setup Choose the first option (Mobile Compute Node-locked licensing), click NEXT, and Browse to the PADSVX_LICENSE.TXT you saved earlier in the C: \ MentorGraphics \ PADSVX folder. This will add the PADSVX license to the existing licenses (9.5 and 2005). When asked if there are any more licenses you want to add click NO.
8. Everything should be ready to use now. You will find the programs under START \ PADSVX2.2. The install does not make shortcuts for them so you will need to do that yourself. Check if PADSVX LAYOUT is working ok (just to be sure, before you do anything else)
9. At any time, if you want to go back to a previous version of PADS (9.5 or 2005) use the MGC BSD Release Switcher found under START / Mentor Graphics PCB Admin Utilities.
In the upper list choose the product you want to unregister (make inactive) and in the lower list the one you want to register (make active). Click OK and it will take a few minutes to do the job. During the switch, you will be asked if you want to configure a license. Choose “I have a valid license. I would like to skip the licensing setup ”.
Click NEXT and choose the working directory. This is the folder where PADS does all the default folders (CAM, Reuse c, etc).
It does not really matter what folder you choose since you should configure these folders in PADS / OPTIONS. They get saved in the PADS ini file so every time you switch to a release it should use the folders defined in that release’s ini file.
Click FINISH and after the istaller registers a few more files it should be done. Click FINISH again.
PADS Pro VX.2.10 version has been installed and successfully activated on Windows 11 64-bit version on February 5, 2010.
Siemens PADS Standard Plus VX.2.11 x64
Mentor Graphics PADS Pro VX.2.10 x64
Mentor Graphics PADS VX.2.10 x64
Mentor Graphics PADS VX.2.8 Pro x64
Mentor Graphics PADS VX.2.7 Pro
Mentor Graphics PADS VX.2.7 x86 x64
Mentor Graphics PADS Student Pro VX.2.6 x86
Mentor Graphics PADS Student Pro VX.2.6 x64
Mentor Graphics PADS Standard Plus VX.2.6 x86
Download Part 1 – 2 GB
Download Part 2 – 2 GB
Download Section 3 – 2 GB
Download section 4 – 154 MB
Download Mentor Universal Cracks
file password link
Follow On Tumblr
Follow On pinterest
Visit our blog